AZ Patio Heaters Patio Heater Owner's Manual download pdf (Page 6)

Lay Bucket inside of Base and screw on large nut.

Tighten with Philips screwdriver.

.To improve the stability , please fill the bucket

with Sand.

Step 3 – Attach Cylinder Housing to Base

Attach Cylinder Housing Loosely to Base with 8 pcs

M5X10 bolts.

Put the Plastic nut & Fastening piece through the post

in order.Put the Tabletop through the post as show.

Step 4 – Attach Post to Cylinder Housing top

Open the door, put post through the hole on the top of

Cylinder Housing.

Attach post to Cylinder Housing using 4pcs M6X10 bolts

and M6 nutVĭ[6PDOOIODWZDVKHUV

Step 5 – Tabletop Installation

Through the Fastening piece to the hole on the Tabletop.Hold

the t abletop using a hand and screw the Fastening piece to the

Plastic connecting anti-clockwise using the other one. Fasten the

Fastening piece.Screw the Plastic nut to the Plastic connecting

anti-clockwise. Fasten the Plastic nut.

Adjust the height of the Tabletop. Loose the Plastic nut and adjust

the Tabletop height of you want. Fasten the Plastic nut.

Put the Plastic connecting through the post as show.

Step 6 – Attach Reflector Studs to Screen Cover

.Insert 3 Reflector Studs & 3 Flat Washers.

.Tighten studs securely.

3 Req’d Reflector Studs

3 Req’d Large Flat Washers

Fill Sand

(For models without tabletop, skip to Step 6)

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

AZ Patio Heaters Patio Heater Owner's Manual Page 6